Click a thumbnail to switch. Click main image for full resolution.
Wear-Resistant Double-Shaft Disc Knife
SKU: DSK-010
Request a Quote
Product overview
Wear-Resistant Double-Shaft Disc Knife is built for double-shaft shredders and bulky plastic waste reduction. Available in D2 / alloy steel / H13 / SKD11 for torque-heavy duty, impact resistance, and manageable maintenance cost. The cutter geometry suits stacked shredder rotors and indexable cutter assemblies.
- Double-shaft shredders
- Bulky plastic waste reduction
- Mixed scrap pre-processing
- Recycling line maintenance
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
D2 / alloy steel / H13 / SKD11
Specification table
| Product family | Double-Shaft Shredder Knives |
|---|---|
| Material | D2 / alloy steel / H13 / SKD11 |
| Subcategory | Double-shaft shredder knife |
| Profile | Disc or insert cutter |
| Typical applications | Double-shaft shredders / Bulky plastic waste reduction / Mixed scrap pre-processing / Recycling line maintenance |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Wear-Resistant Double-Shaft Disc Knife should be treated as a replacement knife reference inside the Double-Shaft Shredder Knives family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Double-Shaft Shredder Knives before confirming material and delivery week.
