Click a thumbnail to switch. Click main image for full resolution.
Agglomerator Straight Knife
SKU: CCK-001
Request a Quote
Product overview
Agglomerator Straight Knife is built for film agglomeration lines and plastic densifying and compaction. Available in H13 for impact resistance, heat control, and predictable regrinding. The profiled body suits fixed or rotary stations where alignment and edge exposure matter.
- Film agglomeration lines
- Plastic densifying and compaction
- Pre-pelletizing size reduction
- Foam and soft plastic recycling
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
H13
Specification table
| Product family | Cutter Compactor and Agglomerator Knives |
|---|---|
| Material | H13 |
| Subcategory | Agglomerator straight knife |
| Profile | Profiled industrial knife |
| Typical applications | Film agglomeration lines / Plastic densifying and compaction / Pre-pelletizing size reduction / Foam and soft plastic recycling |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Agglomerator Straight Knife should be treated as a replacement knife reference inside the Cutter Compactor and Agglomerator Knives family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Cutter Compactor and Agglomerator Knives before confirming material and delivery week.
