Click a thumbnail to switch. Click main image for full resolution.
EREMA-Compatible Cutter Compactor Rotary Knife
SKU: CCK-002
Request a Quote
Product overview
EREMA-Compatible Cutter Compactor Rotary Knife is built for cutter compactor rotor replacement and film densifying systems. Available in SKD11 / D2 for impact resistance, heat control, and predictable regrinding. The profiled body suits fixed or rotary stations where alignment and edge exposure matter.
- Cutter compactor rotor replacement
- Film densifying systems
- Agglomeration and compaction lines
- Soft plastic recycling
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
SKD11 / D2
Specification table
| Product family | Cutter Compactor and Agglomerator Knives |
|---|---|
| Material | SKD11 / D2 |
| Subcategory | Cutter compactor knife |
| Profile | Profiled industrial knife |
| Typical applications | Cutter compactor rotor replacement / Film densifying systems / Agglomeration and compaction lines / Soft plastic recycling |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
EREMA-Compatible Cutter Compactor Rotary Knife should be treated as a replacement knife reference inside the Cutter Compactor and Agglomerator Knives family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Cutter Compactor and Agglomerator Knives before confirming material and delivery week.
