Click a thumbnail to switch. Click main image for full resolution.
Single-Rotor Shredder Cutter
SKU: GSK-005
Request a Quote
Product overview
Single-Rotor Shredder Cutter is built for single-rotor shredder rebuilds and mixed scrap cutting duty. Available in D2 / SKD11 / HSS / alloy steel for mixed-feed shredding and steady replacement life. The insert-style format fits compact cutter seats and short replacement positions.
- Single-rotor shredder rebuilds
- Mixed scrap cutting duty
- Industrial recycling lines
- Shredder maintenance inventory
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
D2 / SKD11 / HSS / alloy steel
Specification table
| Product family | Industrial Shredder Knives and Cutters |
|---|---|
| Material | D2 / SKD11 / HSS / alloy steel |
| Subcategory | Universal shredder knife |
| Profile | Insert block knife |
| Typical applications | Single-rotor shredder rebuilds / Mixed scrap cutting duty / Industrial recycling lines / Shredder maintenance inventory |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Single-Rotor Shredder Cutter should be treated as a replacement knife reference inside the Industrial Shredder Knives and Cutters family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Industrial Shredder Knives and Cutters before confirming material and delivery week.
