Click a thumbnail to switch. Click main image for full resolution.
Veneer Peeling Knife
SKU: WPK-004
Request a Quote
Product overview
Veneer Peeling Knife is built for veneer peeling lines and plywood preparation. Available in HSS / 9CrSi / SKD11 / tungsten carbide for straight cutting, finish quality, and repeatable grinding. The straight edge format suits long bolt-on knife bars and clamp-mounted holders.
- Veneer peeling lines
- Plywood preparation
- Woodworking knife replacement
- Fine-cut veneer production
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
HSS / 9CrSi / SKD11 / tungsten carbide
Specification table
| Product family | Planer, Jointer, and Veneer Knives |
|---|---|
| Material | HSS / 9CrSi / SKD11 / tungsten carbide |
| Subcategory | Veneer peeling knife |
| Profile | Straight plate knife |
| Typical applications | Veneer peeling lines / Plywood preparation / Woodworking knife replacement / Fine-cut veneer production |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Veneer Peeling Knife should be treated as a replacement knife reference inside the Planer, Jointer, and Veneer Knives family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Planer, Jointer, and Veneer Knives before confirming material and delivery week.
