Click a thumbnail to switch. Click main image for full resolution.
Drum Chipper Counter Knife Set
SKU: CCA-007
Request a Quote
Product overview
Drum Chipper Counter Knife Set is built for drum chipper counter knife replacement and anvil and bed knife maintenance. Available in Tungsten Carbide / Carbide for stable counter edges and controlled chip sizing. The straight edge format suits long bolt-on knife bars and clamp-mounted holders.
- Drum chipper counter knife replacement
- Anvil and bed knife maintenance
- Biomass chipping lines
- Wood waste processing
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
Tungsten Carbide / Carbide
Specification table
| Product family | Chipper Counter Knives and Anvils |
|---|---|
| Material | Tungsten Carbide / Carbide |
| Subcategory | Rotary and anvil knife set |
| Profile | Straight plate knife |
| Typical applications | Drum chipper counter knife replacement / Anvil and bed knife maintenance / Biomass chipping lines / Wood waste processing |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Drum Chipper Counter Knife Set should be treated as a replacement knife reference inside the Chipper Counter Knives and Anvils family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Chipper Counter Knives and Anvils before confirming material and delivery week.
